
Type a prompt into an artificial intelligence (AI) model and your answer returns almost instantly.
Producing it sets a whole chain of hardware in motion, dozens of advanced components passing your request in the form of signals from one to the next.
This hardware depends on specialized materials at every layer. Boron is one of them, and it’s featured in two key AI hardware components: Circuit boards and processing chips.
Low-dielectric glass in circuit boards
As AI servers advance, their circuit boards become more complex. The most demanding AI boards now carry 24 to 40 layers, significantly more than the 8 to 12 layers in older boards.
These layers exist to move data, and to move it fast. The signals crossing these boards run at such high frequencies that the board material itself can distort them.
Maintaining signal integrity is now a central design challenge for AI hardware manufacturers.
That’s why circuit boards are adopting low-dielectric glass. Unlike ordinary glass, this specialized glass is engineered to uphold signal integrity without conducting electricity.
In other words, low-dielectric glass carries high-speed signals with very little loss.
Boron is critical to the efficacy of low-dielectric glass. Adding boric oxide (B2O3) lowers the dielectric constant and dissipation factor, two properties that dictate how cleanly high-speed signals move.
To produce effective low-dielectric glass, the boron source must be highly pure. If any contaminants remain, risk of signal loss increases. A refined boron source is therefore preferred to ensure the quality of the finished glass.
Learn more about dielectric glass
Boron doping for AI semiconductors
Once the signal reaches the processor, the real computing begins. A modern AI accelerator, the specialized processor that runs the model, packs tens of billions of transistors onto a tiny sliver of silicon.
Each transistor is a microscopic switch, flipping billions of times a second to carry out the math behind every AI response.
On its own, silicon is a poor conductor. Chip manufacturers dope silicon with trace elements such as boron to improve conductivity.
Boron is introduced through a process called ion implantation. A boron trifluoride (BF3) gas is broken into ions and driven into the silicon, where it forms a positive, p-type region that every silicon-based transistor needs to switch on and off.
As with low-dielectric glass, purity is paramount at this scale and upstream materials must be fully refined. Stray impurities in BF3 can negatively impact how silicon and the transistor behave.
Read more on boron trifluoride and its applications
Purity and precision for AI
As AI hardware scales, the purity of source materials like boron becomes more important to ensure high performance.
At U.S. Borax, we fully refine borates to remove contaminants and help advanced manufacturers meet stringent, exacting production requirements. Our technical experts have proven experience helping customers develop formulations in the most sensitive industries.
To explore how refined borates can support your AI-related application, please contact our technical team.
